Panasonic WJ-DR200 Operating Instructions Manual

Also see for WJDR200 - DIGITAL VIDEO RECORD: Operating instructions User guide

Panasonic WJ-DR200 Operating Instructions Manual Manual pdf 31 page image

-29-LOOP: Repeats playing back the selected numberof playback records.SINGLE CYCLE: Goes on standby after playingback the selected number of records.The default setting is LOOP. Playback Rate SetupThis item lets you select the playback rate in seconds.1. Move the cursor to the PLAY BACK RATE parame-ter in the SEARCH/PLAY menu by pressing theor button.2. Select the desired rate shown below by pressing theor button.0.03, 0.07, 0.10, 0.17, 0.20, 0.33, 0.50, 1.0, 2.0,3.0 ····· 10.0 sec, CAPTURE RATEThe default setting is CAPTURE RATE.2. Select either RECORD TIME or RECORD NUMBERby pressing the or button.RECORD TIME: Searches the disc by recordingtime.RECORD NUMBER: Searches the disc by recordnumber.The default setting is RECORD TIME. Thumbnail Display SetupThis item lets you select the maximum number ofthumbnail pictures displayed in the search window.1. Move the cursor to the THUMBNAIL parameter inthe SEARCH/PLAY menu by pressing the orbutton.2. Select either 8 or 16 by pressing the or but-ton.8: Displays a maximum of 8 thumbnail pictures.16: Displays a maximum of 16 thumbnail pictures.The default setting is 8. PLAY Button SetupThis item lets you select the number of records playedback when the PLAY button is pressed.1. Move the cursor to the PLAY parameter in theSEARCH/PLAY menu by pressing the orbutton.2. Select the desired mode by pressing the orbutton.SINGLE RECORD: Plays back a single record.ALL RECORDS: Plays back all records on thedisc.The default setting is SINGLE RECORD. Playback Mode SetupThis item lets you select the playback mode for theselected PLAY button setup.1. Move the cursor to the PLAY MODE parameter inthe SEARCH/PLAY menu by pressing the orbutton.2. Select either LOOP or SINGLE CYCLE by pressingthe or button.