Panasonic WJ-DR200 Operating Instructions Manual

Also see for WJDR200 - DIGITAL VIDEO RECORD: Operating instructions User guide

Panasonic WJ-DR200 Operating Instructions Manual Manual pdf 20 page image

-18-A (CAMERA ID ON): Records only input A withmultiplexed Camera ID signals.Use this parameter when the Disc Recorder isconnected to a Video Multiplexer. You canselect camera images in playback mode. Thevideo pixel number (resolution) is fixed at 720 *240.A (CAMERA ID OFF): Records only input A withoutmultiplexed Camera ID signals.A+B (CAMERA ID OFF): Records input A and Bwithout multiplexed Camera ID signals.Use this parameter when two cameras are con-nected to the Disc Recorder.Note: When two recording inputs are selected,audio recording is disabled in Multi Shot andTime Lapse Recording mode.The default setting is A (CAMERA ID OFF).6. Move the cursor to the CAMERA TYPE parameter bypressing the or button.7. Select the parameter according to the connectedcamera by pressing the or button.COLOR: Select this mode when a color cameraother than a line-locked camera is connected forinput.COLOR LL: Select this mode when a line-lockedcolor camera is connected for input.B/W: Select this mode when a black and white cam-era other than a line-licked camera is connectedfor input.B/W LL: Select this mode when a line-locked blackand white camera is connected for input.Note: If the CAMERA INPUT item on the same menuis set to A (CAMERA ID ON), neither the COLORLL nor B/W LL parameter of the CAMERA TYPEitem will be displayed (cannot be set).Precautions in Using a Line-locked Camera1. With a line-locked camera, horizontal stripesmay appear in recorded images despite theabove settings.2. With an S-video output camera, monochromeimages will be monitored in standby mode whenCOLOR LL is selected on the above menu, butwill be recorded normally.3. If the CAMERA TYPE parameter COLOR isselected on the above menu, recorded imagesmay be subject to disturbance or the number offrames recorded may be different from the setnumber.4. If you are connecting the WJ-DR200 AV DiscRecorder to the Spot Output (or Camera Output)of a sequential switcher or video multiplexer towhich a line-locked camera is connected, besure to select the CAMERA TYPE parameterLine Lock.The default setting is COLOR.8. Move the cursor to the INPUT CHECK parameter bypressing the or button.9. Press the or button to display the videoselected with this parameter.This function is available only when the CAMERAINPUT parameter is set to A+B (CAMERA ID OFF) inthis menu.10. Press the SET UP/ESC button to return to the SYS-TEM menu. Status Display SetupThis item lets you enable or disable status display orembedded display on the monitor screen.1. Move the cursor to the STATUS DISPLAY parameterin the SYSTEM menu by pressing the orbutton.2. Select the desired mode by pressing the orbutton.ON: Enables status display on the monitor screen.OFF: Enables status display for two seconds on themonitor screen every time the status changes.EMBEDDED: Enables time and date display only inrecording mode and status display in playbackmode.The default setting is ON. Alarm Display SetupThis item lets you enable or disable alarm display on themonitor screen.1. Move the cursor to the ALARM DISPLAY parameterin the SYSTEM menu by pressing the orbutton.2. Select either ON or OFF by pressing the orbutton.ON: Enables alarm display on the monitor screen.OFF: Disables alarm display on the monitor screenThe default setting is ON. Display Position SetupThis item lets you select the positions where the alarmand status displays are placed on the monitor screen.1. Move the cursor to DISPLAY POSITION in the SYS-TEM menu by pressing the or button, thenpress the SET button. The position setup menushown below appears on the monitor screen.PRESS SET_UP/ESC KEY↑ =MOVE UP ↓ =MOVE DOWNRECORD-# STATUS WARNINGYY-MM-DD HH:MM:SS LABEL2. Move the display position by pressing the orbutton, then press the SET UP/ESC but-ton to execute the selection and return to the SYS-TEM menu.