Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 62 page image

English62[Auto switch back mode]Sets whether or not to automatically return to theformer (main) input when the former input videoinitially viewed is restored while viewing the videoof the backup input enabled by the operation of theBackup Input function.[Disable]:Unreturned[Enable]:Returned[Changing mode]Select speed of input switching.[High speed]:If switching between the same signal formats, it ispossible to switch within 1 second.If switching between the different signal formats,picture noise is caused.[Normal speed]:If switching between the same signal formats, it ispossible to switch within 2 seconds.If switching between the different signal formats, ittakes 3 to 4 seconds to switch but picture noise isnot caused.[Backup input change]Displays whether or not operating conditions for theBackup Input function are met.[Inactive]:Indicates that the conditions are not met, andinactivates the Backup Input function.[Active]:Indicates that the conditions are met, and activatesthe Backup Input function.[Main input]Displays the (main) input initially used for viewing.[Current input]Displays whether the input currently in use for viewingis the (main) input initially used for viewing or thebackup one.Setting conditionsThe following table describes restrictions (availablecombinations) on each setting item.BackupHDMI1HDMI2DIGITALLINKDVI-DPCCOMPONENT*VIDEOUSBMainHDMI1HDMI2DIGITAL LINKDVI-D○ × ×PCCOMPONENT*VIDEO× × ×USB × × ×○: Selectable for both Primary and Secondary.×: Not selectable for neither Primary nor Secondary.*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 46)Recall displayPressing displays any of the followings.● When the main input is being used for viewing andthe operating conditions for the Backup Input functionare met.HDMI116:9Main inputBackup OK● When the backup input, enabled by the operation ofthe Backup Input function, is being used for viewing.HDMI116:9Backup InputDVIWhen the conditions for the Backup Input functionare met, the following screen is displayed.Main inputBackup OK