Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 61 page image

61English[Custom]:Repeatedly searches [Current input], [1st searchinput] and [2nd search input] in order, and switchesto an input with a signal.PCSearching...[Searching...] is displayed during the input search.[1st search input], [2nd search input]Set the input to search when [Custom] is selected.[HDMI1] / [HDMI2] / [DIGITAL LINK] / [DVI-D] / [PC] /[COMPONENT]* / [VIDEO] / [USB] / (None)*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 46)Note● With the USB input, the unit determines no signal ispresent when the USB memory is not connected tothe USB terminal.● This menu will be greyed out and cannot be setunder the following conditions.• [Input lock] is not set to [Off]. (see page 65)• [Failover/Failback] - [Input change mode] is notset to [Off]. (see page 61)● If the input is changed by this function, the last inputis selected when the power is turned on next time.If you wish to retain the original input when thepower is turned on, set [Initial input] to the originalinput. (see page 64)Failover/FailbackAutomatically switches to the backup input video if aninterruption of video occurs.1 Select the item with .Select the set point with .[Input change mode][Off]:Disables the Backup Input function.Failover/FailbackInput change mode Off[Quick]:Promptly switches to the backup input if aninterruption of video occurs.The backup video signal needs to be in the sameformat as the (main) input in use for viewing.Upon switching to the backup input, the video andaudio adjustment values for the (main) input usedfor viewing will be inherited.Failover/FailbackInput change modePrimary backup inputAuto switch back modeBackup input changeSecondary backup inputMain inputCurrent inputQuickHDMI1DVI-DDisableActiveHDMI2Main inputChanging mode High speed[Normal]:Switches to the backup input if an interruption ofvideo occurs.The backup video signal does not need to be in thesame format as the (main) input in use for viewing.Upon switching to the backup input, the video andaudio adjustment values for the backup input willbe used.■ [Input change mode]: [Quick]Promptly switches to the backup input if aninterruption of video occurs, and enables switchingbetween digital (HDMI1 / HDMI2 / DIGITAL LINK /DVI-D) inputs.Note● The backup video signal needs to be in the sameformat as the (main) input in use for viewing.● Upon switching to the backup input, the video andaudio adjustment values for the (main) input used forviewing will be inherited.● This function will start operating once a video signal isdetected by both the input in use for viewing and thebackup input and the [Backup input change] item isdisplayed as [Active].[Primary backup input]Sets the first priority backup input.(None) / [HDMI1] / [HDMI2] / [DIGITAL LINK] /[DVI-D]The input that is of the same type as the one in usefor viewing will be greyed out.[Secondary backup input]Sets the second priority backup input.(None) / [HDMI1] / [HDMI2] / [DIGITAL LINK] /[DVI-D]The input that is of the same type as the one in usefor viewing will be greyed out.