Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 52 page image

English52● For handling devices receiving the LightID, such as asmartphone, see the following Panasonic web site.http://panasonic.net/avc/LinkRay/● The LightID function of this unit does not guaranteeall the operations of a smartphone and other devices.WobblingAutomatically shifts the display image (thereforeunnoticeable to the eye) to prevent image retention ofsharper contour of image.Setting this to [On] moves the screen position at certainintervals and displays the images.Note● If [Multi display setting] is set to [On], this functiondoes not operate. (see page 52)● When this function is operating, part of the screenmay appear to be missing.No activity power offWhen this function is set to [Enable], the power is turnedoff (standby) automatically when there is no operation ofthe Display for 4 hours.Starting from 3 minutes before the turn off, theremaining time will be displayed.No activity power offPress any key to abort.3 minWhen the power is turned off due to this function, amessage [Last turn off due to ‘No activity power off’.] isdisplayed next time the power is turned on.Note● While the screensaver is running, this function isdisabled.OSD languageSelect your preferred language.Selectable languagesEnglish(UK)DeutschFrançaisItalianoEspañolENGLISH(US)中文 : Chinese日本語 : JapaneseРусский : RussianMulti display settings1 to 10 displays can be aligned in horizontal directionand vertical direction respectively, and those displaysare regarded as one group. The enlarged image isshown on the combined display.[Multi display settings]- submenu screenMulti display settingsMulti display settingHorizontal scaleBezel H adjustmentVertical scaleBezel V adjustmentLocationOff22A1Note● The settings are memorised separately for eachinput terminal.● When the multi display is set to [Off], adjust to thesame angle of view for [Position] (see page 37).Then, set the multi display to [On]. Again, makefine adjustment of the angle of view for [Position].● The [Position] menu can be adjusted in the multidisplay status.■ [Multi display setting][Off]:The display is not divided when enlarged.[On]:The display is divided when enlarged.When [On] is set, the display aspect is [16:9].■ [Horizontal scale]Set the horizontal scale in the multi display.1 to 10 (1 to 2 for USB input)■ [Vertical scale]Set the vertical scale in the multi display.1 to 10 (1 to 2 for USB input)Example:[Horizontal scale] [5] and [Vertical scale] [5] is set in themulti display