Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 25 page image

25EnglishUSB terminal connectionConnect the USB memory (commercially available) touse [USB media player]. (see page 84)Also, power is supplied when a separately sold stick PC,etc. are connected.Note● A stick PC and connection cables are not suppliedwith this unit.AV IN USBStick PCUSB cable (commercially available)HDMI extension cable (commercially available)Pin assignments and signal names for USB Terminal1 3 42Pin No. Signal name+5 V DCDATA -DATA +GND (Ground)Power of up to 5V/1A can be supplied to an externaldevice when the picture is displayed.● If the electric current exceeding the power supplyingcapability is applied, the output is blocked, and thefollowing message is displayed.[USB DC5V OUT overload. Please remove cable orequipment, then turn the display off/on.]In this case, remove the equipment and then turn thepower off/on using the remote control, etc.Note● If the direct connection to this unit is not possible dueto the size of a stick PC, etc. use a commercially soldextension cable.● Depending on the type of a USB memory device,it may come in contact with the periphery suchas a back cover, and cannot be attached. Use acommercially sold extension cable, or use a smalltype of a USB memory device connectable to thisunit.● Depending on the USB memory, the access lampmay remain blinking even when it is not beingaccessed. In this case, remove the device afterswitching to the input other than USB.Also, when data cloning is running, remove the deviceafter the screen to notify it is finished is displayed.(see page 95)