English68Power on screen delayYou can set the power-on delay time of the displays toreduce the power load, when you press On / Off button> to turn on the multiple displays that areset together.Set each display’s setting individually.[Off]:The display will be turned on at the same time as is pressed.[Auto]:Sets the delay time automatically according to thenumber set for [Display ID].The delay time is determined by multiplying [DisplayID] × 0.3 seconds.Example:When [Display ID] is 3 → 0.9 seconds1 to 30:Set the power-on delay time (second).After pressing ,the display will be powered on with time delaydepending on this setting.Note● While this function is working, the power indicator isblinking green.● This function also works when the power recoversfrom failure or after plugging off and in again thepower cord.Clock displaySets to display / hide the clock.[Off]:Hides the clock.[On]:Displays the clock.Note● The clock is displayed at the lower left of the screenwhen button is pressed.● When [Date and time] is not set, the clock is notdisplayed even when [Clock display] is [On]. (seepage 54)Power on message(No activity poweroff)Sets to show/hide [No activity power off] precautionswhen the power is turned on.[On]:The warning precautions are shown when thepower is turned on.[Off]:The warning precautions are not shown when thepower is turned on.Note● This setting is enabled only when [No activity poweroff] is [Enable] (see page 52).Power on message(Powermanagement)Sets to show/hide an information message that tellsthe power has been turned off by “Power management”function when the power is turned on.[On]:The information is shown when the power is turnedon.[Off]:The information is not shown when the power isturned on.Note● This setting is enabled only when “Powermanagement” function is [On] (see page 50).POWER button lockSets the lock setting for the display Off button>.[On]: operation is disabled.[Off]: operation is enabled.Note● This function is only for TH-55SF1HU, TH-49SF1HUand TH-42SF1HU.
