|
English40Picture Adjustments1 Press to display the[Picture] menu.5050505050505OffRefine enhancer6-segment colour managementGradation smootherOffOffPictureDefault DefaultPicture mode Standard2.26500KBacklightContrastBrightnessColourHueSharpnessGammaColour temperatureDynamic contrastColour enhancementMemory saveMemory loadMemory editOffHighEnhance level2 Select the item to adjust with .● Menu that cannot be adjusted is greyed out.3 Adjust with .4 Press to exit from adjustmode.■ To return to the previous screenPress .■ To reset to defaultsPress while the menu is displayed, orpress when [Default] is selected, then thesettings will be set to factory settings.Note● When displaying still picture with USB input (USBmedia player), only the following settings have aneffect on the picture.[Backlight], [Gamma], [Colour temperature][Picture mode] This menu switches to easy-to-see pictures suitable to the picturesource or environment where thisunit is used.[Vivid signage]Suitable for signage applicationsfeaturing more vivid and sharperimages in bright environmentssuch as a shop.[Natural signage]Suitable for signage applicationssuch as merchandise exhibition,featuring natural tone imageswith colour reproductionemphasized under light.[Standard]Faithfully reproduces originalpicture.[Surveillance]Tone-focused pictures withbrightness reduced suitable forinput from a monitoring camera.[Graphic]Suitable for PC input.[DICOM]Pictures close to the grayscalestandard DICOM Part14.● The settings are memorisedseparately for each inputterminal.Note● DICOM is the abbreviation for “Digital Imaging andCommunications in Medicine”, which is a standardfor communications between medical imagingdevices. Although “DICOM” is used as a picturemode name, this unit is not a medical device. Donot use displayed images for such purposes asdiagnosis.[Backlight] Adjusts luminance of the back light.Darker ↔ BrighterNote● If [Setup] - [LightID] is set to [External control] or[Internal ID], 3 levels of adjustment is available,which are [High], [Mid] and [Low].[Contrast] Selects the proper brightness anddensity for the room.Less ↔ More● In [ENGLISH(US)] OSD language, [Contrast] isdisplayed as [PICTURE].
|
