Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 51 page image

51English[DIGITAL LINK power management]When this function is set to [On], it operates underthe following conditions to turn the power on or offautomatically.When no pictures (sync signal) are detected for60 seconds or so at DIGITAL LINK input:Power is turned off (standby); the power indicatorlights up orange.When pictures (sync signal) are subsequentlydetected:Power is turned on; the power indicator lights upgreen.[DVI-D power management]When this function is set to [On], it operates underthe following conditions to turn the power on or offautomatically.When no pictures (sync signal) are detected for60 seconds or so at DVI-D input:Power is turned off (standby); the power indicatorlights up orange.When pictures (sync signal) are subsequentlydetected:Power is turned on; the power indicator lights upgreen.[PC power management] (DPMS function)When this function is set to [On], it operates underthe following conditions to turn the power on or offautomatically.When no pictures (HD/VD sync signals) aredetected for 60 seconds or so at PC input:Power is turned off (standby); the power indicatorlights up orange.When pictures (HD/VD sync signals) aresubsequently detected:Power is turned on; the power indicator lights upgreen.Note● This function is effective when [Sync] in [Signal] isset to [Auto] or [HV sync] and [Component/RGB-inselect] is set to [RGB]. (see page 46)Note● If [Input search] is set to items other than [Off], the[Input search] function is prioritised. (The “Powermanagement” function does not operate for eachterminal.) (For details of [Input search] function, seepage 60.)● If [Failover/Failback] - [Input change mode] is set toitems other than [Off], the [Failover/Failback] functionis prioritised. (The “Power management” functiondoes not operate for each terminal.) (For details of[Failover/Failback] function, see page 61.)[Power save]This function adjusts the brightness of the backlight toreduce power consumption.[Off]:This function does not operate.[On]:Backlight brightness is reduced.Note● If this function is set to [On] when [Setup] -[LightID] is set to [External control] or [Internal ID],[Picture] - [Backlight] is fixed to [Low].LightIDChanges the transmission setting for the LightID.[Externalcontrol]:Sends the ID set from outside.When the LightID is switched from thissetting, or the unit is turned off, the ID beingsent is cleared.[InternalID]:When the LightID is switched to this setting,or the unit starts up, the internal ID (InternalLightID) is sent.The ID set from outside can also be sent.[Off]: The function is disabled.Use either of the following methods to set the ID fromoutside.• Multi Monitoring & Control Software (see page 76)• USB Media Player (see page 84)NoteFor purchasing LightID, see the following Panasonicweb site.http://panasonic.net/avc/LinkRay/As default, a sample ID is included in the InternalLightID.If [LightID] is set to [Internal ID] at the time ofpurchase, an ID to guide you to the Panasonichomepage is sent.● In the following cases, the reception performance ofthe LightID using devices, such as a smartphone maybe degraded.• When the LCD panel of this unit is exposed to anexternal intense light, etc.• When the multi display setting is used with thisunit, or another LightID transmission device isinstalled adjacently• When receiving far away from this unit, or receivingat a location other than the front of this unit• When receiving from a dark image scene or blackparts outside the display range of the LCD panel● When sending the LightID, displayed images mayflicker due to the brightness change of the LightIDtransmission. This is not a malfunction.