Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 78 page image

English78Enable JavaScript1 Display [Security] of Safari.2 Select [Enable JavaScript] under [Web content].Access from Web BrowserAccess to the TOP screen of the Web browser controlusing a Web browser.1 Start your Web browser.2 Enter the IP address set with the [LANsetup] of the unit.(see page 55)3 Enter the user name and passwordwhen the Authentication screen isdisplayed.4 Click [OK].After logged in, the TOP screen of the Web BrowserControl is displayed.Note● The password used here is the same passwordused for command control and the PJLink securityauthentication.● Default user name and password are as follows:User name: user1 (user rights), admin1 (administratorrights)Password: panasonicChange password first.● The password can be changed on the PasswordSetup screen after logging in (see page 80). Log inwith administer privileges to change this.● When using “Crestron Connected™” (see page 82),log in with the administrator rights.● Under no circumstances, Panasonic Corporation orits associated companies will ask customers theirpassword directly.Even if you are asked directly, please do not revealyour password.Operating with Web Browser■ Description of each sectionPage tabClick these to switch pages.[Status]Click this item, and the status of the Display isdisplayed.[Display control]Click this item to display the Display control page.[Detailed set up]Click this item to display the advanced settings page.[Change password][Crestron Connected™]Click this item to display the Crestron Connected™operation page.[Browser Remote Control]Click this item to display the Browser RemoteControl on the WEB browser, which is the same asthe supplied remote control.Display status pageClick [Status], then [Display status] to display the Statusinformation page.This page displays the Display statuses established forthe items shown below.Displays the type of Display.Displays the firmware version of the Display mainunit.