Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 89 page image

89EnglishStarting / ending Media Player■ For Single Media PlayerStart1. Insert the USB memory device for Media Playerinto the USB terminal of the display unit.Note● Depending on the type of a USB memory device,it may come in contact with the periphery suchas a back cover, and cannot be attached. Use acommercially sold extension cable, or use a smalltype of a USB memory device connectable to thisunit.USBUSB memoryUSB terminal2. Run a USB memory contents check.3. Change INPUT to [USB].EndingChange INPUT to other than [USB].■ For Multi Media PlayerStart1. Connect several units with LAN cables.(See “Example of setting up LAN connection and IPaddress / Subnet mask in the previous section.)2. Insert the USB memory device for Media Playerinto the USB terminal of each display.3. Executes USB memory contents check on eachDisplay.4. Change INPUT for Child to [USB].5. Change INPUT for Parent to [USB].EndingChange INPUT for Parent to other than [USB].Resume Play functionAfter Media Player ends, the file to be played back nexttime varies depending on the setting of [USB mediaplayer settings] - [Resume play].When set to [On]:The file played prior to the end of Media Player startsplaying from the beginning.When set to [Off]:Play starts from the beginning of the first file of thescenario.Note● The resume play function is retained until the unit isturned off or the USB memory device is taken out.