47English■ [Component/RGB-in select]This menu is displayed at PC IN and COMPONENT/RGB IN inputs.Select to match the signals from the source connectedto each terminal.[Component] YP BPR /YCBC R signals[RGB] RGB signalsNote● Set for each input terminal (COMPONENT/RGB IN,PC IN).■ [YUV/RGB-in select]This menu is displayed at HDMI 1, HDMI 2, DIGITALLINK and DVI-D IN inputs.Select to match the signals from the source connectedto each terminal.[YUV] YUV signals[RGB] RGB signalsNote● Set for each input terminal (HDMI 1, HDMI 2,DIGITAL LINK, DVI-D IN).■ [Sync]This menu is displayed at PC IN input.Setting RGB/PC sync signal[Auto]:The H and V sync or synchronized signal isautomatically selected. When both of them havesync signal, H and V sync will be selected.When displaying CS signal, connect to HD inputterminal.[on G]:Uses a synchronized signal on the Video G signal,which is input from the G connector.[HV sync]:Uses a synchronized signal on the Video HD/VDsignal, which is input from the HD/VD connector.Setting Component sync signal[Auto]:The H and V sync or synchronized signal isautomatically selected. When both of them havesync signal, H and V sync will be selected.When displaying CS signal, connect to HD inputterminal.[on Y]:Uses a synchronized signal on the Video Y signal,which is input from the Y connector.[HV sync]:Uses a synchronized signal on the Video HD/VDsignal, which is input from the HD/VD connector.■ [Cinema reality]Faithfully reproduces videos shot with cinema films.Set this to [Off] normally.Note● In [ENGLISH(US)] OSD language, [Cinema reality]is displayed as [3:2 PULLDOWN].● If [Cinema reality] is set to [On], videos includingmovies shot at 24 frames per second arereproduced more naturally.● If the video is unnatural with [On] set, set it to [Off].■ [Noise reduction]Reduces picture noise.[Off]:Disables Noise Reduction.[Min], [Mid], [Max]:Sets strength of Noise Reduction.[Auto]:Noise reduction will be automatically selected from[Min], [Mid] or [Max].■ [MPEG noise reduction]Reduces block noise and mosquito noise on MPEGvideos.[Off]:Disables Noise Reduction.[Min], [Mid], [Max]:Sets strength of Noise Reduction.■ [XGA mode]This menu is displayed at PC IN and COMPONENT/RGB IN inputs.This unit supports XGA signals (1024 × 768, 1280 ×768, 1366 × 768) having different aspect ratios andsampling rates.[Auto]:Automatically detects the signal.Switch the setting to suit the input signal for betterdisplay depends on the angle of view or displayresolution condition.Note● After making this setting, be sure to make eachadjustment (such as [Auto setup]) on the [Position]menu as necessary. (see page 37)