Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 49 page image

49EnglishScreensaver(For preventing image retention)Do not display a still picture, especially in 4:3 mode, forany length of time.If the display must remain on, a Screensaver should beused.[Screensaver] - submenu screenScreensaverStart10:00Mode OffFRIDAY2016/01/01■ Screensaver settingsScreensaver operationWhen the Screensaver is operating, the following 5patterns are displayed full screen for 5 seconds each,and it will be repeated.Black → Dark grey → Grey → Light grey → White →Light grey → Grey → Dark greyTo start Screensaver nowSelect [On] in [Mode].Select [Start] and press .● The Screensaver will be activated.ScreensaverStart10:00Mode OnFRIDAY2016/01/01Note● If the following buttons are pressed while the screensaver is operating, the screen saver is cancelled.Remote control: Main unit: <+(Unit)> <- (Unit)> ● When the display is turned off, the Screensaver willbe deactivated.To set interval of ScreensaverSelect [Interval] in [Mode].Set [Periodic time].● Press to change the time by 15 minutes.● In [ENGLISH(US)] OSD language, [Periodic time]is displayed as [SHOW DURATION].Set [Operating time].● Press once to change the time by 1 minute.Keep pressing down to change the time by 15minutes.● In [ENGLISH(US)] OSD language, [Operatingtime] is displayed as [SAVER DURATION].Periodic timeDeactivated. Operating timeScreensaverStartMode IntervalPeriodic timeOperating time0:000:00FRIDAY2016/01/01 10:00Note● It is not possible to set the duration of [Operatingtime] longer than that of [Periodic time].To set start and finish time of ScreensaverSelect [Time designation] in [Mode].Set [Start time] and [Finish time].● Press once to change the time by 1 minute.Keep pressing down to change the time by 15minutes.● In [ENGLISH(US)] OSD language, [Timedesignation] is displayed as [TIME OF DAY].ScreensaverStart10:00Mode Time designationStart timeFinish time0:000:00FRIDAY2016/01/01Note● Please set [Date and time] before setting [Starttime] and [Finish time]. (see page 54)To turn the power off after ScreensaverSelect [Standby after SCR saver] in [Mode].Set [Screensaver duration].● Press once to change the time by 1 minute.Keep pressing down to change the time by 15minutes.Select [Start] and press .● Screensaver will be activated and the power willbe turned off (Standby) at the time set.ScreensaverStart10:00Mode Standby after SCR saverScreensaver duration 0:00FRIDAY2016/01/01Note● [Screensaver duration] can be set from 0:00 to23:59.When this is set to [0:00], [Standby after SCRsaver] will not be activated.