Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 27 page image

27EnglishIdentifying ControlsMain Unit● To take out/store the power indicator and remotecontrol sensor, operate the lever on the rear panel.It is also possible to press the remote controlsensor directly to store.Note● For normal use, pull out the power indicator andremote control sensor from the edge side of themain unit by operating the lever on the rear panel.Depending on the setup condition such as whenusing the multi display, store them in the main unit.1 Power Indicator / Remote control sensorThe Power Indicator will light.When the power of the unit is ON (Main Power On/ Off button: ON)● Picture is displayed: Green● Power OFF (Standby) with remote control:• When [Network control] is set to [Off]: Red• When [Network control] is set to [On]: Orange(Red/Green)About [Network control] settings, see page 54.● Power OFF with “Power management” function(see page 50): Orange (Red/Green)When the power of the unit is OFF (Main PowerOn / Off button: OFF): No lightNote● The unit will still consume some power as long asthe power cord is still inserted into the wall outlet.● When the power indicator is orange, powerconsumption during standby is generally larger thanthat of when the power indicator is red.INPUTMENUENTER888Unit55-inch model49-inch model42-inch model1 External Input / Output Terminal● Connects to video equipment, PC, etc. (see page15)2

● Turns the power On / Off.3 (INPUT signal selection)● Selects the connected device. (see page 31)4 ● Each time the button is pressed,the menu screen will switch. (see page 35)5 <+ (Unit)> / <- (Unit)>● Adjusts the volume. (see page 32)● On the main screen, switches settings or adjustssettings level. (see page 35)6 < (Unit)> / < (Unit)>● Selects the setting item. (see page 35)7 ● Configures the item on menu screen. (see page35)● Switches aspect mode. (see page 33)8 Built-in speakersNote● To output sound from the built-in speakers of the unit,be sure to set [Output select] in the [Sound] menu to[SPEAKERS]. (see page 39)