57English■ DIGITAL LINK menuDisplays the setting menu of Digital Interface Box.Select [DIGITAL LINK menu] with and press.Note● This function can only be selected when thePanasonic device that supports DIGITAL LINK output(ET-YFB100G, ET-YFB200G) is connected to aDIGITAL LINK / LAN terminal and its power is on.● For details, refer to the manuals of the devices thatsupport DIGITAL LINK output.■ [AMX D. D.]Set whether to allow the Display to be detected by AMXDevice Discovery.[On]:Enables detection by AMX Device Discovery.[Off]:Disables detection by AMX Device Discovery.● For more details, visit the following web site.http://www.amx.com/■ [Crestron Connected™]When this function is set to [On], the Display can bemonitored or controlled via the network using equipmentand application software of Crestron Electronics, Inc.This Display supports the following application softwarefrom Crestron Electronics, Inc.• RoomView ® Express• Fusion RV ®• RoomView ® Server Edition[Crestron Connected™] is a function to connect toa system developed by Crestron Electronics, Inc.which manages and controls multiple system devicesconnected to the network.● For details of “Crestron Connected™”, refer to theCrestron Electronics, Inc. web site (Provided only inEnglish).http://www.crestron.com/For the download of “RoomView ® Express”, refer tothe Crestron Electronics, Inc. web site (Provided onlyin English).http://www.crestron.com/getroomview■ [Extron XTP]Set to [On] when connecting XTP Transmitter made byExtron to USB terminal.● For more details on Extron, visit the following website.http://www.extron.com■ [Reset]You can reset the network setting to the factory defaultof the Display.Select [Yes] with and press .Network settingsResetYes NoUSB media player settingsSet for USB media player function.[USB media player settings] - submenu screenUSB media player settingsUSB media playerResume playScenario file checkNo scenario fileSlide show durationEnable10 secOn■ [USB media player]Set to enable or disable the USB media player function.■ [Resume play]Set resume play off/on.■ [Scenario file check]Execute the contents check of the USB memory which isconnected to the USB terminal. If any error is detected,the error code and file name will be displayed.For details of the error codes, refer to “USB memorycontents check”. (see page 88)Select [Scenario file check] with and press.AvailableScenario file check■ [Slide show duration]Select the displaying duration for still images.[10 sec] to [600 sec]
