4.8 Extension ProgrammingLive Call Screening Recording Mode Assignment †610System Programming 4-129†: Available when the Digital Super Hybrid System is connected to a DigitalProprietary Telephone capable Panasonic Voice Processing System (onethat supports digital proprietary telephone integration; e.g. KX-TVS100).Description Assigns whether to close the mailbox or keep recording theconversation after a call is intercepted.Selection • Jack number: 1 through 8, ( =all jacks)• Stop Rec / Keep RecDefault All jacks – Stop Rec (Stop recording)Programming 1. Enter 610.Display: 610 LCS REC.MODE2. Press NEXT.Display: Jack NO?→3. Enter a jack number.To enter jack number 1, you can also press NEXT.Display example: #1:Stop Rec4. Keep pressing SELECT until the desired selection isdisplayed.5. Press STORE.6. To program another jack number, press NEXT or PREV, orSELECT and the desired jack number.7. Repeat steps 4 through 6.8. Press END.Conditions • For an explanation of jack numbering, see “Rotation of jack number”on page 4-7.• To assign all jacks to one selection, press the key in step 3. In thiscase, the display shows the contents programmed for jack 1.Feature References Section 3, FeaturesLive Call Screening (LCS)Voice Mail Integration for Digital Proprietary Telephones