3 Features CFeatures 3-39C all Log, IncomingDescription If the display digital proprietary telephone (DPT: KX-T7433, KX-T7436, KX-T7230 or KX-T7235) user cannot answer a call, thetelephone automatically records the caller’s information. The usercan also record the caller’s information manually, even afteranswering the call. Moreover, the user can call back the caller bychecking the call log. This is available if a telephone receivesincoming outside calls with a Caller ID service. A maximum of 15calls per telephone can be logged.The displayed information is as follows:• The receiving outside line number and name• The party’s phone number and name• The date and time the call was made• The sequence number and number of times calledConditions • It is necessary to assign your area code first before you use the CallerID feature.• The call is registered at the time DPT finishes ringing. If a call isdirected to multiple DPTs, the call is registered at the DPT that has thesmallest jack number of the ringing DPTs. However, if the telephonewhich is connected to the smallest jack is not a DPT, the call is notregistered.• Information is also recorded even if a transferred call (unscreened) isnot answered.• When the call log is full (i.e. 15 calls are stored), the user can select tooverwrite the data, replacing the oldest call with the newest one at his /her extension (Call Log, Incoming).• The telephone user can lock the display of the unit so that incoming callinformation is not shown on the display. The operator can cancel thelock in case the user forgets the lock code.
