Panasonic KX-TD308 Installation Manual

Also see for KX-T7230: Reference guide User manual User guide Installation manual User manual

Contents

Panasonic KX-TD308 Installation Manual Manual pdf 287 page image

4.3 System ProgrammingCaller ID Name Set1114-44 System ProgrammingDescription With Caller ID Service, the calling party is displayed either by itsID Code or by its name. If the name display is required, use thisprogram to give a name to a caller ID Code stored in program [110]“Caller ID Code Set”.Selection • Location number: 001 through 100• Caller ID Name: 15 characters (max.)Default All locations – Not storedProgramming 1. Enter 111.Display: 111 CALLER NAME2. Press NEXT.Display: Location NO?→3. Enter a location number.To enter location number 001, you can also press NEXT.Display example: 001:Not Stored4. Enter a Caller ID Name.For entering characters, see Section 4.1.3 “Entering Characters”.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new name.5. Press STORE.6. To program another location, press NEXT or PREV, orSELECT and the desired location number.7. Repeat steps 4 through 6.8. Press END.Conditions • Caller ID Name corresponds to the Caller ID Codes stored in program[110] “Caller ID Code Set”.• Each name has a maximum of 15 characters.Feature References Section 3, FeaturesCaller ID