3 Features CFeatures 3-47Call Transfer, Unscreened – to ExtensionDescription Allows the user to transfer an intercom or outside call directly to anextension party. After dialing the destination extension, the userreplaces the handset while listening for the ringback tone.Conditions • If the destination party does not answer within the transfer recall time,the call will return to the user or Operator 1. You can select either oneby system programming.• This function is possible when the destination is sending ringback orbusy tone. If the destination is busy, Camp-On Transfer occurs.• The ringing signal pattern follows the regular ringing pattern dependingon the party being transferred: outside or extension call ringing.• If music on hold is enabled, music is sent to the caller while beingtransferred. It is system-programmable whether to send ringback toneor music on hold to the caller by program [990], Field (1).• The destination extension must have a CO button which is common tothe outside line in use by the transferring party.Programming ReferencesSection 4, System Programming[201] Transfer Recall Time[990] System Additional Information, Fields (1), (11)Feature References NoneOperation References DPT Features, Standard Telephone Features—User Manual Call Transfer — to Extension
