L 3 Features3-98 FeaturesLine Preference – Outgoing (Idle Line / No Line / Prime Line)Description A proprietary telephone user can select a desired outgoing linepreference to originate calls from the following three linepreferences:(1) Idle Line Preference:When you go off-hook, you are connected to an idle line. Anidle line is automatically selected from the pre-assigned lines.(2) No Line Preference:No line is selected when you go off-hook. You must select aline to make a call.(3) Prime Line Preference:When you go off-hook, you are connected to the preassigned line. Assign a line as your prime line beforehand.Conditions • Setting a new line preference feature cancels the previous setting.• To set Prime Line Preference, one prime line is selected from intercomor outside lines.• The outside lines used by users must be connected by programming.• To select Idle Line Preference, outside lines available for the usershould be programmed. Also outside lines available for AutomaticLine Access should be assigned.• The user can override the Idle / Prime Line Preference temporarily toselect a specific line. To select it, press the desired line access button(INTERCOM or CO button) before going off-hook or pressing the SP-PHONE / MONITOR button; or if Full One-Touch Dialing is enabled,press One-Touch Dialing, DSS (Direct Station Selection), REDIAL, orSAVE button.Programming ReferencesSection 4, System Programming[005] Flexible CO Button Assignment[103] Automatic Access Outside Line Assignment[400] Outside Line Connection Assignment[605]–[606] Outgoing Permitted Outside Line Assignment — Day / NightStation Programming.......................................................User ManualFlexible Button Assignment – Loop-CO (L-CO) Button,Single-CO (S-CO) ButtonPreferred Line Assignment – OutgoingFeature References Section 3, FeaturesOutside Line Connection Assignment – OutgoingOperation References Basic Operation—User Manual Making Calls
