4-24 System Programming4.2 Manager ProgrammingFlexible CO Button Assignment005Description Used to determine the use of the flexible CO buttons on proprietarytelephones from a centralized telephone.Selection • Jack number: 1 through 8• Button Code (plus parameter, if required):Default All jacks – CO buttons 1 through 3 = Single-CO 1 through 3;Ring tone type 2Others = Not storedProgramming 1. Enter 005.Display: 005 FLEXIBLE CO2. Press NEXT.Display: Jack NO?→†: Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephonecapable Panasonic Voice Processing System (one that supports digital proprietary telephoneintegration; e.g. KX-TVS100).Parameter1 through 3 (Outside line number)2 through 4 digits (Extension number)16 digits max. (Telephone number)NoneNoneNoneNoneNoneNone2 through 4 digits (Phantom extension number)2 through 4 digits (Extension number)2 through 4 digits (Extension number)2 through 4 digits (Extension number)NoneNoneNone1 through 8 (ring tone type number)Button Code0 (Single-CO)1 (DSS)2 (One-Touch)3 (Message Waiting)4 (FWD/DND)5 (Save)6 (Account)70 (Conference)71 (Log-In/Log-Out)72 (Phantom Extension)8 (Voice Mail Transfer)90 (Two-Way Record)†91 (Two-Way Transfer)†92 (Live Call Screening)†93 (Live Call Screening Cancel)†(Loop-CO)CO (ringer frequency)
