4.8 Extension ProgrammingVoice Mail Access Codes6094-128 System ProgrammingDescription Assigns a mailbox number for each extension, only if program[990] “System Additional Information, Field (18)” is set to “free”.Selection • Jack number: 1 through 8, (-1 / -2),(-1 = first part, -2 = second part)• Mailbox number: 16 digits (max.)Default All jacks – Not storedProgramming 1. Enter 609.Display: 609 V-MAIL CODES2. Press NEXT.Display: Jack NO?→3. Enter a jack number.To enter jack number 1, you can also press NEXT.To select the second part (-2), press NEXT after entering a jack number.Display example: #1-1:Not Stored4. Enter a mailbox number.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new number.5. Press STORE.6. To program another jack, press NEXT or PREV, orSELECT and the desired jack number.7. Repeat steps 4 through 6.8. Press END.Conditions • For an explanation of jack numbering, see “Rotation of jack number”on page 4-7.• The system supports a maximum of four jacks for connection to a VoiceProcessing System as the Voice Mail or Automated Attendant ports.• Each mailbox number has a maximum of 16 digits, consisting of 0through 9, , # and PAUSE.• To display parts of the mailbox number which have scrolled off thedisplay, press or .Feature References Section 3, FeaturesVoice Mail Integration
