4.6 Outside Line ProgrammingDIL 1:1 Extension — Day / Night407-408System Programming 4-101Description The Direct In Lines (DIL) 1:1 feature allows incoming outside callsto be directed to a specific extension. When an outside line isassigned as DIL 1:1, it is necessary to assign the destination. Theseprograms specify the extension number for day or night mode.Selection • Outside line (CO) number: 1 through 3, ( =all outside lines)• Extension number: 2 through 4 digits / Disable (no DIL 1:1)Default All outside lines – Disable — Day / NightProgramming 1. Enter a program address (407 for day or 408 for night).Display example: 407 DIL 1:1 DAY2. Press NEXT.Display: CO Line NO?→3. Enter an outside line number.To enter outside line number 1, you can also press NEXT.Display example: CO1:Disable4. Enter an extension number.To change the current entry, press CLEAR and enter the new number.To disable DIL 1:1, press CLEAR.5. Press STORE.6. To program another outside line, press NEXT or PREV, orSELECT and the desired outside line number.7. Repeat steps 4 through 6.8. Press END.Conditions • To assign all outside lines to one selection, press the key in step 3. Inthis case, the display shows the contents programmed for outside line 1.• You set the extension numbers in program [003] “Extension NumberSet”, voice mail extension numbers in program [118] “Voice MailExtension Number Assignment”, phantom extension numbers in program[124] “Phantom Extension Number Assignment” or floating numbers ofpager(s), DISA (Direct Inward System Access) message(s) and extensiongroup(s) in program [813] “Floating Number Assignment”.• If an outside line is also programmed for DIL 1:N in programs[603]–[604] “DIL 1:N Extension and Delayed Ringing — Day / Night”,it is regarded as a DIL 1:1 line.Feature References Section 3, FeaturesDirect In Lines (DIL) Night ServiceDirect Inward System Access (DISA)
