4.7 COS ProgrammingAccount Code Entry Mode5084-118 System ProgrammingDescription There are three account code modes: Option, Verified-All Calls andVerified-Toll Restriction Override. This program determines themode to be used by each Class of Service (COS).Option mode: The user can enter any account code, if needed.Verified – All Calls mode:The user must always enter a pre-assigned account code to make anoutside call.Verified – Toll Restriction Override mode:The user must enter a pre-assigned account code when the userneeds to override toll restriction.Selection • COS number: 1 through 8, ( =all COS)• Option / Verify – All (Verified-All Calls) /Verify – Toll (Verified-Toll Restriction Override)Default All COS – OptionProgramming 1. Enter 508.Display: 508 ACC CODE OPT2. Press NEXT.Display: COS NO?→3. Enter a COS number.To enter COS number 1, you can also press NEXT.Display example: COS1:Option4. Keep pressing SELECT until the desired selection isdisplayed.5. Press STORE.6. To program another COS, press NEXT or PREV, orSELECT and the desired COS number.7. Repeat steps 4 through 6.8. Press END.Conditions • To assign all COS to one selection, press the key in step 3. In thiscase, the display shows the contents programmed for COS 1.• Program [105] “Account Codes” is used to define the Account Codesfor the Verified modes.• Program [601] “Class of Service” is used to assign a Class of Service toeach extension.Feature References Section 3, FeaturesAccount Code EntryToll Restriction Override by Account Code Entry
