3 Features SFeatures 3-139Station HuntingDescription If a called extension is busy, Station Hunting redirects theincoming call to an idle member of the extension group. Idleextensions are automatically searched according to the programmedtype. Six hunting types are available as follows:Circular hunting: The extensions are searched until an idleone is found, regardless of the jack number.Termination hunting: The extensions are searched untilreaching the extension which has the highest jack number inthe group.Voice Mail (VM) hunting: All the VM ports are searcheduntil an idle one is found to permit VM Service.Automated Attendant (AA) hunting: All the AA ports aresearched until an idle one is found to permit AA Service.Ring Group hunting: All the extensions in the ring groupring simultaneously.Uniform Call Distribution (UCD) hunting: Successivecalls go to a different extension each time a call is received.Extensions are hunted in a circular way.One of the hunting types is selected for each extension group.To leave the hunting group temporarily, use the Log-Out function.To re-join, use the Log-In function.Conditions • If all the searched extensions are busy, a busy tone is sent to the caller.• If the called extension has set Do Not Disturb, Call Forwarding or Log-Out, Station Hunting skips the extension.• If UCD is set, the Hunting is performed as a setting of UCD.Programming ReferencesSection 4, System Programming[106] Station Hunting Type[602] Extension Group AssignmentFeature References Section 3, FeaturesExtension Group Uniform Call Distribution (UCD)Log-In / Log-Out Voice Mail IntegrationRing GroupOperation References Not applicable.
