Operation Manual – Smart Link-Monitor LinkH3C S3100 Series Ethernet Switches Chapter 2 Monitor Link Configuration2-3Note:z Currently, member ports of a Monitor Link group cannot be dynamic linkaggregation groups.z If the uplink or downlink port in the Monitor Link group is a link aggregation group,you cannot directly delete this aggregation group or change this aggregation groupinto a dynamic aggregation group. To delete this aggregation group, you must firstunbind this aggregation group from the Monitor Link.2.2 Configuring Monitor LinkNote:Before configuring a Monitor Link group, you must create a Monitor Link group andconfigure member ports for it. A Monitor Link group consists of an uplink port and one ormultiple downlink ports. The uplink port can be a manually-configured or static LACPlink aggregation group, an Ethernet port, or a Smart Link group. The downlink ports canbe manually-configured link aggregation groups or static LACP link aggregation groups,or Ethernet ports.2.2.1 Configuration TasksTable 2-1 Monitor Link configuration tasksTask RemarksCreating a Monitor Link Group RequiredConfiguring the Uplink Port RequiredConfiguring a Downlink Port Required2.2.2 Creating a Monitor Link GroupTable 2-2 Create a Monitor Link groupOperation Command RemarksEnter system view system-view —Create a Monitor Link group monitor-link group group-id Required
