Operation Manual – HWPingH3C S3100 Series Ethernet Switches Chapter 1 HWPing Configuration1-22SD Maximal delay: 0 DS Maximal delay: 0Packet lost in test: 0%Disconnect operation number: 0 Operation timeout number: 0System busy operation number: 0 Connection fail number: 0Operation sequence errors: 0 Drop operation number: 0Other operation errors: 0[Sysname-hwping-administrator-icmp] display hwping history administratoricmpHWPing entry(admin administrator, tag icmp) history record:Index Response Status LastRC Time1 3 1 0 2000-04-02 20:55:12.32 4 1 0 2000-04-02 20:55:12.33 4 1 0 2000-04-02 20:55:12.24 3 1 0 2000-04-02 20:55:12.25 3 1 0 2000-04-02 20:55:12.2For detailed output description, see the corresponding command manual.1.3.2 DHCP TestI. Network requirementsThe HWPing client is an H3C S3100 series Ethernet switch, while the DHCP server canbe an H3C S5600 series Ethernet switch. Perform a HWPing DHCP test between thetwo switches to test the time required for the HWPing client to obtain an IP addressfrom the DHCP server.II. Network diagramFigure 1-3 Network diagram for the DHCP testIII. Configuration procedurez Configure DHCP Server(Switch B):Configure DHCP server on Switch B. For specific configuration of DHCP server, refer tothe DHCP module in the H3C S5600 Series Ethernet Switches Operation Manual.z Configure HWPing Client (Switch A):# Enable the HWPing client. system-view[Sysname] hwping-agent enable
