Operation Manual - DNSH3C S3100 Series Ethernet Switches Chapter 1 DNS Configuration1-4Note:You may configure up to six DNS servers and ten DNS suffixes.1.3 Displaying and Maintaining DNSAfter the above configuration, you can execute the display command and thenslookup type command in any view to display the DNS configuration information andthe DNS resolution result to verify the configuration effect. You can execute the resetcommand in user view to clear the information stored in the dynamic domain nameresolution cache.Table 1-3 Display and maintain DNSOperation Command… RemarksDisplay static DNSdatabase display ip hostDisplay the DNS serverinformation display dns server [ dynamic ]Display the DNS suffixes display dns domain [ dynamic ]Display the information inthe dynamic domain namecachedisplay dns dynamic-hostAvailable in anyviewDisplay the DNS resolutionresultnslookup type { ptr ip-address |a domain-name }Available in anyviewClear the information in thedynamic domain namecachereset dns dynamic-host Available inuser view1.4 DNS Configuration Example1.4.1 Static Domain Name Resolution Configuration ExampleI. Network requirementsThe switch uses static domain name resolution to access host 10.1.1.2 through domainname host.com.
