Operation Manual – AAAH3C S3100 Series Ethernet Switches Chapter 2 AAA Configuration2-19Table 2-17 Set the status of RADIUS serversOperation Command RemarksEnter system view system-view —Create a RADIUS schemeand enter its viewradius schemeradius-scheme-nameRequiredBy default, a RADIUSscheme named "system"has already been createdin the system.Set the status of the primaryRADIUSauthentication/authorizationserverstate primaryauthentication { block| active }Set the status of the primaryRADIUS accounting serverstate primaryaccounting { block |active }Set the status of thesecondary RADIUSauthentication/authorizationserverstate secondaryauthentication { block| active }Set the status of thesecondary RADIUSaccounting serverstate secondaryaccounting { block |active }OptionalBy default, the RADIUSservers specified with IPaddresses in the RADIUSscheme are all in theactive state.2.2.8 Configuring the Attributes of Data to be Sent to RADIUS ServersTable 2-18 Configure the attributes of data to be sent to RADIUS serversOperation Command RemarksEnter system view system-view —Create a RADIUSscheme and enter itsviewradius schemeradius-scheme-nameRequiredBy default, a RADIUSscheme named "system" hasalready been created in thesystem.Set the format of theuser names to be sentto RADIUS serveruser-name-format{ with-domain |without-domain }OptionalBy default, the user namessent from the switch toRADIUS server carry ISPdomain names.Set the units of dataflows to RADIUSserversdata-flow-format data{ byte | giga-byte |kilo-byte | mega-byte }packet { giga-packet |kilo-packet | mega-packet | one-packet }OptionalBy default, in a RADIUSscheme, the data unit andpacket unit for outgoingRADIUS flows are byte andone-packet respectively.
