Canon MB2300 series Online Manual

Also see for MB2300 series: Getting started Online manual Online manual

Contents

Canon MB2300 series Online Manual Manual pdf 706 page image

Cannot Detect the Machine during Wired LAN Setup: Check 1Is the LAN cable connected, and are the machine and the router turned on?Make sure that the LAN cable is connected.Make sure that the machine is turned on.Confirming that the Power Is OnMake sure that the router is turned on.If the LAN cable is connected and the machine or the network device isturned off:Turn on the machine or the network device.After turning on the machine or the network device, it may take some time until ready for use. After a whilejust turning on the machine or the network device, click Redetect on the Check Printer Settings screen.When the machine is detected, follow the instructions on the screen to continue to set up the networkcommunication.If the LAN cable is connected and the machine and the network device areturned on:If the machine could not be detected after clicking Redetect even when the machine and the networkdevice are turned on, or when you have turned them on, go to check 2.Cannot Detect the Machine during Wired LAN Setup: Check 2706