Forwarding Scanned Data to the Computer Using the OperationPanel of the MachineBefore forwarding scanned data to the computer, confirm the following:• The scanner driver is installed.If the scanner driver is not yet installed, install the scanner driver from our website.• The machine is connected to a computer correctly.Make sure that the machine is connected to the computer correctly.Do not plug in or unplug the USB cable or LAN cable while the machine is in operation, or when thecomputer is in the sleep or standby mode.If you perform scanning via a network connection, make sure that all the required settings have beenspecified.Network Scan Settings• The destination and the file name are specified in Canon IJ Scan Utility.You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings ofCanon IJ Scan Utility:Settings Dialog1. Make sure that the machine is turned on.2. Flick the HOME screen, then tap Scan.Using the Operation PanelThe screen for selecting to which you save the data is displayed.3. Tap PC.4. Tap the computer to forward the scanned data.Tap Local (USB) for a USB-connected computer, or tap the computer to forward the scanned data for anetwork-connected computer.560
