Using the Caller ID Service to Reject CallsIf you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's IDmatches the condition specified in this setting, the machine rejects the phone call or fax reception from thesender.Note• This setting may not be supported depending on the country or region of purchase.Contact your telephone company to confirm whether it provides this service.Specify the setting following the procedure below.1. Make sure that the machine is turned on.2. Flick the HOME screen, then tap Setup.Using the Operation Panel3. Tap Device settings.4. Tap FAX settings.5. Tap Security control.6. Tap Caller rejection.7. Tap Yes.The Caller rejection conditions screen is displayed.8. Specify the rejection conditions.Tap a setting item and select Accept or Reject.Anonymous no.Selects whether to reject a phone call or fax reception from an anonymous number.Out of area no.Selects whether to reject a phone call or fax reception out of the subscribed service area.Rejected numbersSelects whether to reject a phone call or fax reception from the specified numbers.9. Tap OK to finish specifying the rejection conditions.If you select Reject for Rejected numbers, Register rejected numbers? is displayed on the touchscreen. Tap Yes, then register the rejected number.For details on how to register the rejected number, see Registering the Rejected Number.666
