Switching the Paper Source to Match the PurposeIn this printer, there are two paper sources, a cassette 1 and a cassette 2.You can facilitate printing by selecting a paper source setting that matches your media type or purpose.The procedure for setting paper source is as follows:1. Select Quality & Media from the pop-up menu of the Print Dialog2. Select the media typeFor Media Type, select the same paper type loaded in the printer.3. Select the paper sourceFor Paper Source, select the item below that matches your purpose.Cassette (Auto Select)Based on the paper settings on the print dialog and the cassette paper information registered on theprinter, the printer automatically determines which cassette to use and feeds paper from thatcassette.Cassette 1Paper is fed from the cassette 1.Cassette 2Paper is fed from the cassette 2.Important• When a media type other than Plain Paper is selected for Media Type, paper cannot besupplied from the cassette 2.• When a paper size other than US Letter, US Legal, or A4 is selected for Paper Size, papercannot be supplied from the cassette 2.4. Complete the setup367