Setting the Administrator PasswordYou can specify or disable the administrator password.Specifying the administrator password requires you to enter the password to change the machine settings orconnection settings.Entering the administrator password is required to change the setting items in the following menus.• ECO settings• Quiet setting• Web service setup• FAX settings• LAN settings• Device user settings• Language selection• Firmware update• Administrator password setting• Operation restrictions• Reset settingFollow the procedure below to specify the administrator password.1. Make sure that the machine is turned on.2. Flick the HOME screen, then tap Setup.Using the Operation Panel3. Tap Device settings.4. Tap Administrator password setting.5. When the confirmation screen to specify the administrator password is displayed, tap Yes.6. Check the message, then tap OK.7. Tap the range where the administrator password is valid.Remote UI/Network ToolEntering the administrator password is required to change the setting items using the Remote UI orIJ Network Tool.LCD/Remote UI/Network ToolEntering the administrator password is required to change the setting items using the operationpanel of the machine, the Remote UI, or IJ Network Tool.340
