Precautions for Safe Transport of the MachineWhen relocating the machine, make sure of the following.Important• Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficientprotective material to ensure safe transport.• Always transport the machine with ink tanks installed. If you transport the machine without ink tanks, inkin the print head may leak.• With the print head and ink tank left installed in the machine, press the ON button to turn off the power.This allows the machine to automatically cap the print head, thus preventing it from drying.• After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing somay cause the ink to leak during transport and cause damage to the machine.• When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" tokeep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".1. Turn the machine off.2. Confirm that the POWER lamp is off and unplug the power cord.Important• Do not unplug the machine while the POWER lamp is lit or flashing, as it may cause malfunctionor damage to the machine, making the machine unable to print.3. Remove the cassettes from the machine, then shorten it until the retraction position afterremoving paper.Paper Sources to Load Paper4. Close the paper output support, then retract the output tray extension and the paper outputtray.5. Reinsert the cassettes.6. Unplug the printer cable from the computer and from the machine, then unplug the powercord from the machine.330
