Rejecting Fax ReceptionYou can set the machine to reject faxes with no sender information or those from specific senders.Select one of the following conditions to reject faxes.• Faxes with no caller identification.• Faxes from senders not registered in the machine's directory.• Faxes from senders registered in the machine as rejected numbers.Select a fax rejection condition following the procedure below.1. Make sure that the machine is turned on.2. Flick the HOME screen, then tap Setup.Using the Operation Panel3. Tap Device settings.4. Tap FAX settings.5. Tap Security control.6. Tap FAX reception reject.7. Tap ON.8. Select a condition of rejecting fax reception.No sender info.Rejects faxes with no caller identification.Not in directoryRejects faxes from the senders not registered in the machine's directory.Rejected numbersRejects faxes from the senders registered in the machine as rejected numbers.For details on how to register the rejected number, see Registering the Rejected Number.Note• When the machine rejects reception, Reception rejected. is displayed on The Fax standby screen.• Faxes with no caller identification are also rejected when the setting other than No sender info. isselected.Registering the Rejected NumberRegister the rejected number following the procedure below.663
