Aligning the Print HeadIf printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print headposition.Note• When the ink has run out during printing the nozzle check pattern, the error message will appear on thetouch screen.A Message Is DisplayedYou need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)** Be sure to use paper that is white and clean on both sides.1. Make sure that the power is turned on.2. Load a sheet of A4 or Letter-sized plain paper in the cassette 1.After inserting the cassette into the machine, the paper information registration screen is displayed onthe touch screen. Select A4 or Letter for Page size and Plain paper for Type, then tap Register.If a message is displayed on the screen, follow the directions in the message to complete registration.Important• The cassette 2 is not available for the print head alignment procedure. Be sure to load paper inthe cassette 1.3. Extend the output tray extension, then open the paper output support.4. Flick the HOME screen, then tap Setup.Using the Operation PanelThe setup menu screen will appear.5. Tap Maintenance.The Maintenance screen will appear.6. Tap Auto head alignment.211
