Firmware updateImportant• This setting item is for the administrator.You can update the firmware of the machine, check the firmware version, or perform settings of anotification screen, a DNS server and a proxy server.Note• Only Check current version is available when Disable LAN is selected for Change LAN in LANsettings.• Install updatePerforms the firmware update of the machine. If you select Yes, the firmware update starts. Follow theon-screen instructions to perform update.Important• When you use this function, make sure that the machine is connected to the Internet.• If the firmware update is carried out, all faxes stored in the machine's memory are deleted.• You cannot start the firmware update under the following conditions:• While the machine is sending or receiving a fax• While the machine is storing the unprinted fax in machine's memory (memory reception)• When the unsent faxes are stored in the machine's memoryNote• If the firmware update is not complete, check the following and take an appropriate action.• When using wired LAN, make sure that the machine is connected to the computer with a LANcable properly.• Check the network settings such as an access point or a router.• If Cannot connect to the server. is displayed on the touch screen, tap OK, then try again aftera while.• Check current versionYou can check the current firmware version.• Update notification settingWhen Yes is selected and the firmware update is available, the screen to inform you of the firmwareupdate is displayed on the touch screen.• DNS server setupPerforms settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup,follow the display on the touch screen to perform settings.• Proxy server setupPerforms settings for a proxy server. Follow the display on the touch screen to perform settings.263
