7. AdvancedImage 7-713. Use ↑ and ↓ to select the AxisLink radio buttonsImage 7-724. Use ← and → to select the ON or OFF radio buttons5. Press ENTER to enable/disable the selected radio button6. Press BACK to return to the Geometry Edit menu.7.5.6.6 Shift AdjustmentWhat can be done with the Shift adjustment ?With the Shift adjustment it is possible to shift the whole image. This is considered as a displacement of the 4 corner points of the2x2 mode. The same dialog box is used as for the geometry edit.How to use the Shift adjustment?1. Start up the Geometry Edit menu2. Press ↓ to select Shift ....3. Press ENTERA dialog box is displayed. Note that In the shift adjustment, the Adjust mode is selected by default (instead of the Select modefor the other geometry adjustments).4. Press ENTER to go to the Edit Mode90 R59770330 SIM 7QP SERIES 08/12/2014
