7. AdvancedImage 7-2027. Press ENTER to confirmThe Internal Pattern will be displayed.8. Press BACK to return to the Installation menu.7.9.9 Driver PatternsWhat can be done?The projector is equipped with different driver patterns which can be used for adjustment purposes.Geometry adjustments can not be used on these driver patterns.Some of the patterns can be inverted by hitting ENTER on the RCU while the pattern is displayed and somepatterns can be changed to another color by hitting Color – or Color + on the RCU.Available Driver Patterns• Diagonal• Hatch• Color bars• Gray levelsHow to display a Driver Pattern?1. Press the MENU key to activate the Menu bar.2. Push the cursor key ← or → to highlight Installation in the menu bar.3. Push the ↓ key to pull down the Installation menu.4. Push the cursor key ↑ or ↓ to highlight Driver pattern.5. Push the → key to pull down the Driver Pattern menu.6. Push the cursor key ↑ or ↓ to highlight the desired Driver PatternR59770330 SIM 7QP SERIES 08/12/2014 161
