7. AdvancedA bullet shows the active setting7.6.6.2 CLO TargetWhat must be done?The light output target for the CLO is set in this menu. This value is forced on the projector provided the CLO has been set ON andthe target can be met.The CLO target can be set in the range 200 .. 30000 for SIM 7QP & SIM 7QP HC. This range is extended to 200.. 40000 for SIM 7QP HB & SIM 7QP HB&C.How to set the CLO target ?1. Press MENU to activate the Tool bar2. Press → to select the Lampsitem3. Press ↓ to pull down the Lamps menu4. Use ↑ or ↓ to select CLO5. Press → to pull down the menu6. Use ↑ or ↓ to select Target ...Image 7-1057. Press ENTERA dialog box is displayedImage 7-1068. Use ←or →, the numeric keys on the remote, or the keypad to change the target value.7.7 GeneralOverview• Pause• Freeze• Identification7.7.1 PausePauseThe Pause function allows to interrupt the image display. The dimmer and lens opening are set to minimal position, the projectorremains with full power (lamp is on) for immediate restart.106 R59770330 SIM 7QP SERIES 08/12/2014
