7. Advanced5. Press → to pull down the menu6. Use ↑ or ↓ to select the lamp to be reset7. Press ENTERA dialog box is displayedImage 7-1018. Use ←or →, the numeric keys on the remote, or the keypad to enter the serial number of the new lamp (serial number 000000will not be accepted).7.6.5 Lamp power mode (only for SIM 7QP & SIM 7QP HC)DescriptionThe lamp can be set to Normal or Economic mode:• Normal: full lamp power of 280W is set (generation 2 lamp)• Economic: the lamp power is reduced to 250W (generation 2 lamp) and the light output is decreasing accordingly.SIM 7QP HB & SIM 7QP HB&C only run in Normal lamp power mode and have no Economic lamp power modeavailable.C AUTION : Switching between Normal lamp mode and Economic lamp mode can only be done 6 times andonly within the first 100 hours of the lamp life! On each switch a dialog box indicates the actual amount ofperformed lamp power mode switches and asks for confirmation.Once the lamp life time has exceeded 100 hours, the menu will be disabled.How to set the lamp power mode ?1. In the OSD, browser to Lamps > Lamp power mode > Normal or Economic.Image 7-1022. Press ENTER to confirm.104 R59770330 SIM 7QP SERIES 08/12/2014
