7. Advanced5. Press → to open the menu6. Use ↑ or ↓ to select the desired layer (for example Layer 1)7. Use ↑ or ↓ to select the desired input (for example Data on BNC)Image 7-38Note: Inputs that are not hardware compatible with this layer are greyed out.Note: if a file is already forced for that input it will be shown on the right.8. Press ENTERThe Load dialog box is displayed9. Use ↑ or ↓ to select the desired file (for example /Standard/SXGA+@60.xml)10.Press ENTERThe file is selected and will be loaded in the future.To delete the forced file, go to the desired input and press ENTER.7.5 GeometryOverview• Introduction• Geometry files• Accessing the Geometry menu• Geometry distortions• Load• Edit• Rename a Geometry File• Copy a Geometry File• Delete a Geometry File7.5.1 IntroductionWhat can be done ?With the geometry corrections, this projector can be used in a wide variety of curved and flat-screen applications, ranging from flator straightforward cylindrical displays to the wildest shapes that can be imagined: by pre-distorting the image inside the projector, acorrect geometry can be achieved on curved screens, without requiring additional computational power on the IG’s side.R59770330 SIM 7QP SERIES 08/12/2014 69
