4. InstallationAlso see the lens connection procedure.4.6 Projector configurationThe different configurationsDepending on the installation the projector can be mounted in different ways, the 4 different configurations are:1. Rear/Ceiling2. Rear/Table3. Front/Ceiling4. Front/Table1 23 4Image 4-29Projector configurations4.7 ConnectionsOverview• Power connection• Signal connections• Communication4.7.1 Power connectionVoltage, Ampere, Frequency ratingProjector type Voltage range (AC) Current FrequencySIM 7 100 – 240 V single phase 6 – 3 A 50 – 60 HzHow to connect the power ?1. Use the supplied power cord to connect the projector to the power outlet.2. Plug the female power connector into the male connector at the rear of the projector26 R59770330 SIM 7QP SERIES 08/12/2014
