B. NVG option (for SIM 7QP HC)1. First phase (TOD value is increased from 100 till 1000): CCD is moving to higher transmission until is has reached ± full trans-mission2. Second phase (TOD is set to 1001):- NVG filter moves out of the light path- ECR is still at its minimum, being 25%- CCD closes to the position of around 40% (to meet the TOD value of 1001)- CLO-TOD tracking Dynacolor set is enabled3. Third phase (TOD value is further increased): CCD is moving to higher transmission until is has reached full transmission4. Fourth phase (TOD value is further increased to 10000): ECR is moving to full transmission188 R59770330 SIM 7QP SERIES 08/12/2014
