3Com 6200 Hardware And Software Users Manual

Also see for 3CR13500: Software install guide

Contents

3Com 6200 Hardware And Software Users Manual Manual pdf 48 page image

4-16 3COM Security Switch 6200 Hardware and Software Users GuideConfiguring the Security Switch 6200 SystemConfiguringStatic RoutesStatic IP routes are user-defined routes that cause packets moving between asource and a destination to take a specific path.To configure Static Routes:1. Select Option 10 from the main menu.Static Routes=============2. Enter the desired option to add, delete, or modify a static route or enterx to return to the main menu. For example:Modify the Static Routes Delete, Modify oreXit>[eXit]: aEnter Destination [0.0.0.0/0]: 10.0.0.0Enter Network Mask in dot notation [0.0.0.0]: 255.0.0.0Enter the Next Hop Gateway [0.0.0.0]: 192.168.10.1Enter the Metric [1]:Static Routes=============Modify the Static Routes Delete, Modify oreXit>[eXit]: aEnter Destination [0.0.0.0/0]: 192.168.20.0/24Enter the Next Hop Gateway [0.0.0.0]: 192.168.10.1Enter the Metric [1]: 2Static Routes=============Modify the Static Routes Delete, Modify oreXit>[eXit]:3. Enter the desired option to add, delete, or modify additional staticroutes or enter x to return to the main menu.Destination Netmask Gateway MetricDestination Netmask Gateway Metric10.0.0.0 255.0.0.0 192.168.10.1 1Destination Netmask Gateway Metric10.0.0.0 255.0.0.0 192.168.10.1 1192.168.20.0 255.255.255.0 192.168.10.1 2