|
3COM Security Switch 6200 Hardware and Software Users Guide 4-13Configuring the Security Switch 6200 SystemConfiguringNetworkInterfacesA network interface associates an IP address with a physical connection andoptionally a VLAN id. To configure network interfaces:1. Select Option 8 from the main menu.IP Interfaces=============2. To add a network interface, select add from the main menu.For example:Modify the IP Interfaces Delete, Modify oreXit>[eXit]: aPhysical Interface [fastethernet 1]:VLAN Interface or N>[N]:Interface State enabled>[enabled]:Enter the IP Address [0.0.0.0/0]: 128.205.1.23/24Broadcast Address [128.205.1.255]:MTU [1500]:IP Interfaces=============3. Enter the desired option to add, delete, or modify additional networkinterfaces or enter x to return to the main menu. For example:Modify the IP Interfaces Delete, Modify oreXit>[eXit]: aPhysical Interface [fastethernet 1]:VLAN Interface [N]: y Enter VLAN ID <1 - 4095>:100Interface State enabled>[enabled]:Enter the IP Address [0.0.0.0/0]: 128.205.2.23/24Broadcast Address [128.205.2.255]:MTU [1500]:Enabled Address Netmask Broadcast MTUmanagement 1enabled192.168.10.6 255.255.255.0 192.168.10.255 1500Enabled Address Netmask Broadcast MTUmanagement 1enabled192.168.10.6 255.255.255.0 192.168.10.2551500fastethernet 1enabled128.205.1.23 255.255.255.0 128.205.1.255 1500
|
