|
4-10 3COM Security Switch 6200 Hardware and Software Users GuideConfiguring the Security Switch 6200 SystemSNMP Traps==========Change the SNMP Trap Destinations Delete, Modifyor eXit>[eXit]:7. Enter the desired option or enter X to return to SNMPConfiguration Menu.SNMP configuration==================1) SNMP Server2) Communities3) Trap DestinationsX) Exit8. Enter the desired option or enter X to return to the main menu.ConfiguringPhysicalInterfacesThere are three types of physical interfaces on the system: management,gigabitethernet, and fastethernet. The management interfaces allow you tomanage the configured interfaces.To configure the physical interfaces:1. Select Option 6 from the main menu.Physical Interfaces===================Destination Port Type Version Community10.2.1.48 162 trap SNMPv1 foobarInterfaceMAC Address(Configured) AutonegDuplex Speedmanagement 1 00:03:47:f1:aa:52 (N) on half 10management 2 00:03:47:f1:aa:53 (N) on half 10fastethernet 1 (N) on half 10fastethernet 2 (N) on half 10fastethernet 3 (N) on half 10fastethernet 4 (N) on half 10fastethernet 5 (N) on half 10fastethernet 6 (N) on half 10fastethernet 7 (N) on half 10fastethernet 8 (N) on half 10fastethernet 9 (N) on half 10fastethernet 10 (N) on half 10fastethernet 11 (N) on half 10fastethernet 12 (N) on half 10fastethernet 13 (N) on half 10
|
