2-6 3COM Security Switch 6200 Hardware and Software Users GuideInstallationTabletopMountingThe system can be mounted on any desk or table top. To do this you first needto attach the four rubber feet, supplied with the system, to the bottom of thebox. To do this, complete the following:1. Turn the system over onto its top with the bottom facing up.2. Locate the indented feet locators, as shown in the following figure.3. Peel backing off of the rubber feet and press them down firmly onthe indents.Once the rubber feet are installed you can mount the system on a solidflat surface.Place rubber feet here.
