A – Command Line InterfaceShow CommandA-64 59097-00 A0ns [option]Displays name server information for the specified [option]. If you omit [option],name server information for the local domain ID is displayed. [option] can have thefollowing values:allDisplays name server information for all switches and ports.[domain_id]Displays name server information for the switch given by [domain_id].[domain_id] is a switch domain ID.[port_id]Displays name server information for the port given by [port_id]. [port_id] is aport Fibre Channel address.pagebreakDisplays the current pagebreak setting. The pagebreak setting limits the display ofinformation to 20 lines (On) or allows the continuous display of information withouta break (Off).perf [option]Displays performance information for all ports. Refer to the ”Show Perf Command”on page A-84.port [port_number]Displays operational information for the port given by [port_number]. Ports arenumbered beginning with 0. If [port number] is omitted, information is displayed forall ports. Table A-15 describes the port parameters.Table A-15. Show Port ParametersEntry DescriptionAIinit Incremented each time the port begins AL initialization.AIinitError Number of times the port entered initialization and theinitialization failed.Bad Frames Number of frames that have framing errors.ClassXFramesIn Number of class x frames received by this port.ClassXFramesOut Number of class x frames sent by this port.ClassXWordsIn Number of class x words received by this port.ClassXWordsOut Number of class x words sent by this port.ClassXToss Number of times an SOFi3 or SOFn3 frame is tossed fromTBUF.DecodeError Number of decode errors detected
